| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Control Type: | PLC |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
ZPS-900/ZPS-1200 Double Hook Drawing Machine, Tire Shredder Machine, Car Crusher Machine
OULI waste tire rubber powder equipment: composed by the decomposition of waste tire powder crushing, screening unit composed of magnetic carrier. Through the decomposition of waste tire facilities, tire processing into small pieces, and then crushing mill of the rubber block, rubber powder to be mixed wire; then powder magnetic separator, the steel and rubber powder separated completely. Through the feeding device through two sieve beds filter out the fine material and then by magnetic roller, magnetic separation of a steel wire, Preparation of 10 mesh fineness of the purity of-40mesh powder(fineness optional).This processing technology,there is no air pollu-tion,no waste water,low operation cost.
3.Other Problems4.Parameters
| Model number | ZPS-900 | ZPS-1200 |
| Input size | Less than 900 | Less than 1200 |
| Discharge size | 50-300mm(adjustable) | 50-300mm(adjustable) |
| Motor power | 22*2 kw | 55*2 kw |
| Dimension | 3450*2100*2400mm | 4100*2730*3300mm |
| Amount of waste tire | 800-1500T/h | 2000-3800kg/h |
| Screen power | 1.5kw | 5.5kw |
| Main shaft speed | 19rpm | 22rpm |
| Screen speed | 4rpm | 25rpm |
| Number of blades | 18pcs, made of alloy steel, welded | 25pcs, made of alloy steel, welded |
| Gearbox | Harden gears, large torque | Harden gears, large torque |
| Weight | 5.8T | 15.6T |
| Rubber crushing machine | |||
| Parameter/model | XKP-400 | XKP-450 | XKP-560 |
| Front Roll diameter(mm) | 400 | 450 | 560 |
| Back Roll diameter (mm) | 400 | 450 | 510 |
| Roll working length(mm) | 600 | 800 | 800 |
| Roll ratio | 1:1.237 | 1:1.38 | 1:1.3 |
| Front roll speed (m/min) | 17.32 | 23.2 | 25.6 |
| Adjusting nip range(mm) | 0-10 | 0-10 | 0-15 |
| Motor power (kw) | 37 | 55 | 110 |
| Overall dimensions (mm) | 3950×1800×1780 | 4770×1846×1835 | 4750×2300×2000 |
| Weight (t) | 8 | 12 | 20 |
| Wire pulling out machine | The first step in tire recycling procession |
| Heavy duty body | |
| Hooks and cross pulling die made of 45# steel, tempered and quenched | |
| Equipped with protection frame avoiding the dangers during working | |
| Two series: hydraulic one and mechanic one | |
| Easy to operate and change spare parts (hooks and cross pulling die) | |
| tire cutter | Cutting tires into pieces before shredding |
| Small tire pieces are easier to process in shredder | |
| Knives made of high quality YG-20 steel, long using time | |
| Hydraulic control | |
| One clamping cylinder and one cutting cylinder | |
| Equipped with a roller platform to process big tires | |
| ZPS-900/1200 Tire shredder |
The high-capacity shredder was specially developed for direct size reduction of tires into cleanly cut tire chips, size 50x50 mm. cutting shafts for the production of larger tire chips are available high torque at low speed cut even the strongest tires into pieces. |
| All construction characteristics are designed for continuous operation in order to achieve highest throughput rates at lowest costs. | |
| Extremely precise tolerances between the cutting knives produce cleanly cut tire chips at low energy consumption. | |
| The cutting knives made of high quality alloy steel can be re-sharpened and reused which increases the service life and reduces the operating costs. | |
| The complete cutting chamber is lined with hard wear plates. | |
| Large doors allow for easy access into the cutting chamber. | |
| The shear between the two rollers will make tire chips into powders as well loosen rubbers, steels and textiles | |
| XKP-400/450/560/610 Rubber Crusher |
Roller body made of cast steel |
| Surface of roller made of alloy steel, welded when worn out | |
| One flat surface roller and one teethed roller, high throughput of powders | |
| Bottom made of cast iron | |
| Emergency stop when overload | |
| Distance between the two rollers can be adjusted. | |
| Hard gear gearbox | |
| Equipped with screening machine, magnetic separator and fiber separator, 99% purified rubbers will be got. | |
| Magnetic separator | Muti-stage belt style magnetic separator can reach more purified rubbers |
| Separated steels will be in one place, easy to collect | |
| Permanent magnet, no more power consumption | |
| Fiber separator | After the grinder, the nylon wires will be grinded into fluff; According to centrifugal force, density difference, the fluff will be separated. The spin fans inside the cyclone barrel driven by the motor throw the compounds to the wall, at this time, light fluff will be upwards and fall down into the inside barrel; heavy rubbers wi |
){kind=link}